Technical Parameters：
参数项目 | CS350NC-O | |
锯切范围 （正切/45°斜切） | ◎ | φ115 |
□ | 110×110 mm | |
┗ | 110×110 mm | |
150×60 mm | ||
适用锯片 | 外径φ275～φ350内孔φ32销孔2φ11-PCD63 | |
主电机 | 2/4变极 3.0/4.0Kw | |
额定压力（液压） | 4MPa | |
机器外形尺寸 | 2200×1100×2200mm | |
Performance characteristics:
※ Simple operation, low noise, no dust pollution, good sawing quality, etc.;
※ Automatic oil feeding, single maximum feeding stroke is 700mm, feeding accuracy reaches ± 0.1mm;
※ Adopt hydraulic drive, powerful knife, no climbing;
※ The vertical slide adopts oily ball-type linear guide, which is light and easy to wear;
※ The feeding and clamping pressure can be controlled separately, especially suitable for thin-wall pipe cutting, to ensure that the deformation caused by clamping is not minimized on the basis of non-skid;
※ According to the need to choose a variety of sawing section, the angle is accurate, no burr, flanging and other defects;
※ After the high-speed steel saw blade wears, the teeth can be used continuously and the cost of consumables is low.